Loading...
Menu

Knit a Pair of Flip Mitts and Fingerless Gloves

Knit a Pair of Flip Mittens

or Fingerless Gloves

 

 

Copyright 2016 by Janis Frank

 

Make yourself a nifty pair of flip mitts. They’re hip, trendy and handier than a pocket on a shirt! Not only can you make these super awesome mitts for just about anyone from teen to adult, but you can forgo the finger portion and make some cool fingerless gloves. Technically, they’re fingerless mittens but that just sounds weird.

 

They’re knitted on double point needles, also known as DPN. Though this sounds intimidating, it really is very simple. You’ll need to know how to knit to make this project, but knitting in the round is the same as knitting flat. Only difference is you don’t flip your work back in forth; it’s done a continuous circle.

 

The sizing for mittens, like socks or slippers, is somewhat general. The small size will fit someone with a smaller hand, medium is an average lady’s hand, large is for an average man’s hand, and extra large will fit a very large man’s hand.

 

Table of Contents

Things You Need

 

Small

Mitten

Thumb

 

Medium

Mitten

Thumb

 

Large

Mitten

Thumb

 

Extra Large

Mitten

Thumb

 

Finger Flap

 

Grafting the Fingertips

 

Attaching the Velcro

 

How to Pick Up a Stitch

 

Abbreviations

 

Helpful Hints

 

Links

 

Things you need

Yarn (a standard ball of worsted weight yarn will be more than enough)

Size 5 mm (US size 8) double pointed needles (or whatever size needles you need to get the correct gauge).

Stitch holder

Hook and loop fastener (AKA – Velcro*)

Glue

 

Gauge

18 stitches = 4 inches

24 rows = 4 inches

 

Small

The Mitt

Cast on 28 sts (loosely). Divide these evenly as possible on three of the double pointed needles.

 

Round 1 – 12: K2, P2 (Creates knit 2 purl 2 ribbing).

 

Round 13 – 17: Knit

 

Round 18: K1, pick up a st, k1, pick up a stitch. K26.

 

Round 19 – 20: Knit

 

Round 21: K1, pick up a st, k3, pick up a stitch. K26.

 

Round 22 – 23: Knit

 

Round 24: K1, pick up a st, k5, pick up a stitch. K26.

 

Round 25 – 26: Knit

 

Round 27: K1, pick up a st, k7, pick up a stitch. K26.

 

Round 28 – 29: Knit

 

Round 30: K1, pick up a st, k9, pick up a stitch. K26.

 

Round 31 – 32: Knit

 

Round 33: K1, place next 11 sts onto the stitch holder. K26.

Round 34: K1, pick up a st, K26.

 

Round 35 – 37: Knit

 

Round 38 – 42: K2, P2

 

Bind off loosely.

 

The Thumb

Worked over the 11 sts on the stitch holder.

 

Pick up and divided the 11 sts on the stitch holder between the 3 double pointed needles. One of the needles will have more sts than the others.

 

Round 1 – 12: Knit

 

Round 13: K2tog around. (You may have to pass the last stitch from one dpn the next dpn to do this).

 

Round 14: Knit

 

Pull yarn through.

 

Medium

The Mitt

Cast on 32 sts (loosely). Divide these evenly as possible on three of the double pointed needles.

 

Round 1 – 12: K2, P2 (Creates knit 2 purl 2 ribbing).

 

Round 13 – 17: Knit

 

Round 18: K1, pick up a st, k1, pick up a stitch. K30.

 

Round 19 – 20: Knit

 

Round 21: K1, pick up a st, k3, pick up a stitch. K30.

 

Round 22 – 23: Knit

 

Round 24: K1, pick up a st, k5, pick up a stitch. K30.

 

Round 25 – 26: Knit

 

Round 27: K1, pick up a st, k7, pick up a stitch. K30.

 

Round 28 – 29: Knit

 

Round 30: K1, pick up a st, k9, pick up a stitch. K30.

 

Round 31 – 32: Knit

 

Round 33: K1, pick up a st, k11, pick up a stitch. K30.

 

Round 34 – 35: Knit

 

Round 36: K1, place next 13 sts onto the stitch holder. K30.

Round 37: K1, pick up a st, K30.

 

Round 38 – 40: Knit

 

Round 41 – 45: K2, P2

 

Bind off loosely.

 

The Thumb

Worked over the 13 sts on the stitch holder.

 

Pick up and divided the 13 sts on the stitch holder between the 3 double pointed needles. One of the needles will have more sts than the others.

 

Round 1 – 13: Knit

 

Round 14: K2tog around. (You may have to pass the last stitch from one dpn the next dpn to do this).

 

Round 15: Knit

 

Pull yarn through.

 

Large

The Mitt

Cast on 36 sts (loosely). Divide these evenly as possible on three of the double pointed needles.

 

Round 1 – 12: K2, P2 (Creates knit 2 purl 2 ribbing).

 

Round 13 – 17: Knit

 

Round 18: K1, pick up a st, k1, pick up a stitch. K34.

 

Round 19 – 20: Knit

 

Round 21: K1, pick up a st, k3, pick up a stitch. K34.

 

Round 22 – 23: Knit

 

Round 24: K1, pick up a st, k5, pick up a stitch. K34.

 

Round 25 – 26: Knit

 

Round 27: K1, pick up a st, k7, pick up a stitch. K34.

 

Round 28 – 29: Knit

 

Round 30: K1, pick up a st, k9, pick up a stitch. K34.

 

Round 31 – 32: Knit

 

Round 33: K1, pick up a st, k11, pick up a stitch. K34.

 

Round 34 – 35: Knit

 

Round 36: K1, pick up a st, k13, pick up a stitch. K34.

 

Round 37 – 38: Knit

 

Round 39: K1, place next 15 sts onto the stitch holder. K34.

Round 40: K1, pick up a st, K34.

 

Round 41 – 43: Knit

 

Round 44 – 49: K2, P2

 

Bind off loosely.

 

The Thumb

Worked over the 15 sts on the stitch holder.

 

Pick up and divided the 15 sts on the stitch holder between the 3 double pointed needles. One of the needles will have more sts than the others.

 

Round 1 – 18: Knit

 

Round 19: K2tog around. (You may have to pass the last stitch from one dpn the next dpn to do this).

 

Round 20: Knit

 

Pull yarn through.

 

Extra Large

The Mitt

Cast on 40 sts (loosely). Divide these evenly as possible on three of the double pointed needles.

 

Round 1 – 12: K2, P2 (Creates knit 2 purl 2 ribbing).

 

Round 13 – 17: Knit

 

Round 18: K1, pick up a st, k1, pick up a stitch. K38.

 

Round 19 – 20: Knit

 

Round 21: K1, pick up a st, k3, pick up a stitch. K38.

 

Round 22 – 23: Knit

 

Round 24: K1, pick up a st, k5, pick up a stitch. K38.

 

Round 25 – 26: Knit

 

Round 27: K1, pick up a st, k7, pick up a stitch. K38.

 

Round 28 – 29: Knit

 

Round 30: K1, pick up a st, k9, pick up a stitch. K38.

 

Round 31 – 32: Knit

 

Round 33: K1, pick up a st, k11, pick up a stitch. K38.

 

Round 34 – 35: Knit

 

Round 36: K1, pick up a st, k13, pick up a stitch. K38.

 

Round 37-38: Knit

 

Round 39: K1, pick up a st, k15, pick up a stitch. K38.

 

Round 40 – 41: Knit

 

Round 42: K1, place next 17 sts onto the stitch holder. K38.

Round 43: K1, pick up a st, K38.

 

Round 44 – 46: Knit

 

Round 47 – 52: K2, P2

 

Bind off loosely.

 

The Thumb

Worked over the 17 sts on the stitch holder.

 

Pick up and divided the 17 sts on the stitch holder between the 3 double pointed needles. One of the needles will have more sts than the others.

 

Round 1 – 20: Knit

 

Round 21: K2tog around. (You may have to pass the last stitch from one dpn the next dpn to do this).

 

Round 22: Knit

 

Pull yarn through.

 

Finger Flap

Instructions are written for small (medium, large, extra large)

Cast on 32 (36, 40, 44) loosely.

 

Round 1 – 6: K2 P2

 

Round 7 and on: Knit around until work measures 3 (3.5, 4, 4.5) inches from the cast on edge.

 

Next round: K1 K2tog K10 (12, 14, 16) K2 tog K2 K2tog K10 (12, 14, 16) K2tog K1.

 

Next 2 rounds: Knit

 

Next round: K1 K2tog K8 (10, 12, 14) K2 tog K2 K2tog K8 (10, 12, 14) K2tog K1.

 

Next 2 rounds: Knit

 

Next round: K1 K2tog K6 (8, 10, 12) K2 tog K2 K2tog K6 (8, 10, 12) K2tog K1.

 

Next 2 rounds: Knit

 

Next round: K1 K2tog K4 (6, 8, 10) K2 tog K2 K2tog K4 (6, 8, 10) K2tog K1.

 

Next 2 rounds: Knit

 

Transfer the stitches onto two needles being sure that the thumb is along the edge of fold.

 

Break yarn leaving enough to graft the fingertips and sew in ends. 12 inches is plenty.

Graft Fingertips

The divided stitches will look something like this:

 

With a darning needle, insert the needle through the front loop of the first needle as if to PURL.

 

Insert needle through the stitch on the back needle as shown.

 

Insert the needle through the back loop of the first stitch AND through the stitch of the next stitch as if to PURL. Drop the first stitch.

 

 

Insert the needle through the stitch on the back needle as if to PURL. Drop this stitch.

 

Insert the needle through the back loop of the next stitch on the front needle and the front loop of the next stitch as if to *PURL. Drop the first stitch.

 

Insert the needle through the stitch on the back needle as if to PURL. Drop this stitch.

 

Repeat from * until there are no stitches left on either needle.

 

Pull the yarn tight.

 

Make another mitten to match.

 

Attaching the Velcro

Cut a small piece of Velcro. Keeping both halves of the Velcro together, attach it to the back of the mitten first. Glue it in place.

 

Keeping the Velcro pieces together, place some glue on the other half of the Velcro. Pull the finger flap back (off the fingers). Press firmly. DO NOT pull the Velcro apart until ALL the glue has dried completely.

 

How to Pick Up a Stitch

I use this method to increase a stitch or pick up a stitch because it doesn’t leave a hole in your work. It takes a little longer to do but worth the effort in the final piece.

 

Make the stitch in the yarn stretch between two stitches

 

Pick the yarn up with the needle.

Transfer the stitch onto the opposite needle.

 

Knit this newly formed stitch. You may have to pull the yarn forward a bit to get your needle beneath the yarn.

It automatically twists the stitch eliminating the hole.

 

Abbreviations

K – Knit

P – Purl

K2tog – knit 2 together

sts – stitches

st – stitch

 

Helpful Hints

 

You don’t need a stitch holder. Even a piece of yarn will work.

 

Instead of glue, you can also sew the Velcro on. I find glue is simpler and quicker.

 

Customize this pattern as you see fit. If you want the cuff longer, do so. If you need a longer thumb or finger flap, add more rows. As long as your stitch counts stay the same, it should work out fine.

 

Some folks like to felt their mittens as it can help stop the wind from blowing through the stitches. Be careful though because felting shrinks your work! It’s hard to guess how much shrinkage will happen as there are so many variables involved, from temperature of the water to how much agitation occurs during the felting process. You can give it a try but make sure you use PURE wool! Anything that is a blend won’t felt properly. My last attempt at felting a pair of mittens for myself resulted in my young son getting a new pair of mitts. At least they didn’t go to waste :-/

 

If you have any questions or comments you can reach me at [email protected].

 

If you love this pattern, be sure to check out my website KweenBee.com. There’s a lot more patterns!!

 

Copyright 2016

Janis Frank

 

Links

Like me on Facebook

How to Videos on YouTube

My blog – KweenBee and Me – Lots of free patterns here :-)

My patterns on Craftsy

My Shop on Etsy

 

*Velcro is a registered trademark.


Knit a Pair of Flip Mitts and Fingerless Gloves

Make yourself a nifty pair of flip mitts. They're hip, trendy and handier than a pocket on a shirt! Not only can you make these super awesome mitts for just about anyone from teen to adult, but you can forgo the finger portion and make some cool fingerless gloves. Technically, they're fingerless mittens but that just sounds weird. They're knitted on double point needles, also known as DPN. Though this sounds intimidating, it really is very simple. You'll need to know how to knit to make this project, but knitting in the round is the same as knitting flat. Only difference is you don't flip your work back in forth; it's done a continuous circle. The sizing for mittens, like socks or slippers, is somewhat general. The small size will fit someone with a smaller hand, medium is an average lady's hand, large is for an average man's hand, and extra large will fit a very large man's hand.

  • ISBN: 9781310200281
  • Author: Janis Frank
  • Published: 2016-01-30 19:05:07
  • Words: 2053
Knit a Pair of Flip Mitts and Fingerless Gloves Knit a Pair of Flip Mitts and Fingerless Gloves